PP storage liquid bottle

PP storage liquid bottle for suction machine

Suction machine bottle

Product details:

◆O-ring overs the top of bottle for a positive, leakproof seal

◆Including safety valve

◆It can be cleaned by autoclave, and meet for the sterilizer of European Class B

◆There are the scale line, easy to identify

Specification:

◆Material: PP (polypropylene)

◆Dimension: Φ14×31 cm

◆Max capacity: 1000ml

◆Highest autoclave temperature: 134°C pressure

◆Highest autoclave pressure: 0.21MPa

Caution

◆Open the holder plug, clean up the valve mouth, and leveling the rubber valve clack on the float. The valve clack shall not be warped, bent and broken, but well connected with the float. The float shall be able to move freely in its support without any blockage.

◆Lift the holder plug with hand to make the float contact the water surface perpendicularly. Gradually lower the holder cover to let the float rise;

◆Tighten the holder plug, attach the aspiration tube conductor at the inlet, and screw firmly the regulating valve, then actuate the suction;

◆Put the aspiration conductor into one clean water pail or attempt to simulate actual application to aspirating the liquid into the holder of the overflow device. As a result, the float will rise as the liquid level ascends until the valve is closed and aspiration stops automatically. The final position of liquid level depends on the aspiration process adopted.

◆Release the regulating valve, set the suction switch off, open the holder plug and empty the liquid in the holder. The float shall be at the bottom of the support and the valve is in open status in case of re-screwing firmly the holder plug;

◆If so, the overflow device is considered as being in normal condition, which can be used for clinical practice.