Hemoglobin Analyzer
Short Description:
◆Smart TFT color screen
True color screen, intelligent voice, humanized experience, data changes are always at hand
◆ABS+PC material is hard, wear resistant and antibacterial
White appearance is not affected by time and use, and highly in antibacterial properties
◆Precision test result
The precision of our hemoglobin analyzer CV≤1.5%, because adopted by quality control chip for the internal quality control.
Black portable accurate hemoglobin meter
◆ Unique Microfluidics, the top domestic craft
Unique disposable microfluidic chip, one-time use, completely eliminate carry pollution.
◆ Small volume of blood test
7μL of blood volume is enough to support one test.
◆ Get test result within 3 seconds
Within 3seconds, HB analyzer will show your results on the big TFT display.
◆ Big data storage
It can support storage of 2000 results.
◆ Large physical button, permanent magnet suction feedback processing unit
After millions of tests, button is still as sensitive as ever.
◆ Power Supply
The analyzer can be powered by AC adapter or built-in rechargeable Li-ion battery.
Power requirements: AC 100～240V, 20VA 50/60Hz; DC 5V, 1A.
|
Principle |
Microfluidic and spectrophotometry with scattering compensation technology | |
|
Calibration |
Factory calibrated; needs no further calibration | |
|
Blood sample |
Material |
Capillary /venous whole blood |
|
Volume |
7μL |
|
|
Parameters |
Hemoglobin |
√ |
|
HCT |
√ |
|
|
Measurement range |
Hemoglobin |
0–25.6 g/dL |
|
HCT |
N/A |
|
|
Results |
≤3s |
|
|
Memory |
2000 test results |
|
|
Precision |
CV≤1.5% |
|
|
Accuracy |
≤3% |
|
|
Operating Conditions |
15°C～35°C ; ≤85% RH |
|
|
Storage condition |
Device |
-20°C～60°C ; ≤90% RH |
|
Test chip/strip |
2°C～35°C ; ≤85% RH |
|
|
Shelf life |
Device |
Three years (about 20 samples per day) or 22,000 tests |
|
Test chip/strip |
2 years when opened canister |
|
|
Power Source |
AC Adapter |
√ |
|
Battery |
rechargeable lithium battery |
|
|
Interface |
USB, Bluetooth, wifi, printer |
|
|
Dimension |
130mm × 82mm × 31.5mm |
|
|
Weight |
220g (built-in battery included) |
|
|
Use convenience |
fill blood in chip directly |
|
1. Fill the cuvette by placing the tip of the cuvette in the drop of blood.
2. Place the filled cuvette in the cuvette holder and push it back.
3. Results appear in less than three seconds.
Clinic, family doctors:
For anemia screening and diagnosis.
Chronic disease management：
Pharmacies and chronic disease management institutions provide long-term for patients with anemia.
Bedside test:
To get patient testing data quickly and develop follow-up treatment plan for severe anemia.
Initial screening of blood donors:
Applied in blood stations or blood donation vehicles for initial screening of blood donors.
